 |
 |
 |
 |
 |
 |
Model, Military Nomenclature and NSN Numbers |
Frequency
Range |
Power
Handling Capability |
|
 |
||||
| 1001
Part of OE-175/FRC 5985-01-062-1169 |
4.0 - 30.0 MHz | 25 kW CW/50 kW PEP | 19 element rotatable log periodic. The Model LP-1001-CA is a leader in the field, providing a transmit band width of 4 through 30 MHz. The unique design characteristics of this antenna provide reliable, high powered capabilities for communications over short, medium and long distance point to point circuits. | |
| 1002-CA
Part of AS-218/G 5985-01-426-4277 |
6.0 - 40.0 MHz | 25 kW CW/50 kW PEP | 14 element rotatable log periodic. The Model LP-1002-CA has been designed for high power, HF/VHF coverage, for commercial, industrial and military applications. It exhibits high gain and reliability for medium to long range communications. | |
| 1005-CA
Part of AS-3515/GRC 5985-01-121-4334 |
3.0 - 30.0 MHz | 25 kW CW/50 kW PEP | 19 element rotatable log periodic. The Model LP-1005-CA is the only log periodic of its kind, with unprecedented transmit capability over the full 3 through 30 MHz bandwidth and a 2 through 30 MHz receive capability. Previously this could only be achieved with a large rhombic or wire log antennas requiring several acres for installation. | |
| 1017-CA
5985-01-028-8263 |
6.2 - 30.0 MHz | 2 kW CW/4 kW PEP | 17 element rotatable log periodic. The Model LP-1017-CA is a foreshortened array, about half the size of a full sized antenna, yet it provides full coverage over 6.2 to 30 MHz. This antenna is ideal for maritime, diplomatic, and long haul communications where space and weight limitations are critical. | |
| 1018 | 30.0 - 1100.00 MHz | 500 W @ 30 MHz/100 W @ 1000 MHz | The Model LP-1018 log periodic dipole antenna has been designed for transmission or reception in either oriented position - providing a vertical or horizontal polarization. Applications for this antenna include point to point, ground to air, surveillance, etc. The broadband width of 30 through 1100 MHz, together with its high gain of 8.0 dB, and high front to back ratio of 15 dB, yield an antenna of infinite possibilities and applications. | |
| 1019 | 100.0 - 1100.00 MHz | 200 W | The Model LP-1019 log periodic antenna has been designed for maximum efficiency and high directive gain as needed for point to point surveillance, ground to air and ground to space communications. The antenna can be mounted on the face of any tower for fixed azimuth in either vertical or horizontal polarization. This antenna can also be mounted on a single or dual axis rotator for variable elevation or azimuth. it is available in an optional, stainless steel, version as Model LP-1019-SS. |
|
| Model, Military Nomenclature and NSN Numbers |
Frequency
Range |
Power
Handling Capability |
Antenna
Description |
|
|
||||
|
1112-MR AS-3098/U 5985-00-009-0129 |
4.0 - 30.0 MHz | 5 kW CW/10 kW PEP | 17 element rotatable log periodic. The Model LP-1112-MR is a lightweight, transportable and rotatable log periodic antenna system covering the range of 4 through 30 MHz. It is designed for temporary or permanent installation with minimum deployment time. This unique antenna is of extremely small size, considering its broad frequency coverage. The antenna dimensions are only 96 x 62 feet (29.3 x 18.89 meters) with a tower height of 60 feet (18.3 meters). The net weight of the system, uncrated, is 2000 lbs. Rotation is accomplished through the use of a mechanical stop and halyard device, eliminating the necessity for electric power of any kind, during the system erection and operation. Installation and erection can be performed by a crew of 6 men in less than 4 hours. All installation tools and fixtures are included in the antenna kit. |
| 1402
5985-00-097-8802 |
30.0 - 76.0 MHz | 75 W CW/150 W PEP | 7 element tactical, transportable VHF antenna. The Model LP-1402 is a manpack, transportable antenna designed for VHF, tactical communications in the field. Its versatility and practical design is surpassed only by its rugged reliability. Supplied complete in a backpack. When erected, this system may be used for vertical or horizontal polarization at heights of 20 feet (6 meters). In addition to its excellent electrical communications performance, human engineering factors have been emphasized in the design to provide an easily erectable, foolproof antenna system. Erection of it can be accomplished by 2 men in less than 10 minutes. The top mast section is made of fiberglass to enhance antenna operation in the vertical mode. Polarization can be easily switched without lowering the antenna. | |
| 1403 5985-01-441- 5478 |
30.0 - 88.0 MHz | 65 W CW/130 W PEP | 9 element tactical, transportable VHF antenna. With the exception of the expanded operating banc, the Model LP-1403 is similar in construction and application to that of the Model LP-1402 listed above. | |
| 1910 | 2.0 - 30.0 MHz | 200 W CW/400 W PEP | The Model 1910 is a rugged, lightweight, manpack, tactical dipole antenna system that can be erected by 2 people in less than 15 minutes. This system provides reliable short and medium range sky wave communications in virtually all types of terrain. This broadband, terminated, center-fed dipole antenna requires no tuning across the entire bandwidth and so the need for antenna adjustment or an antenna tuner, is eliminated. | |
| Loop antenna (Description: PDF 237KB) |
Frequency range 2-32MHz | Receive only | Our basic antenna is an untuned, balanced loop which has dimensions that are small compared with the wavelength. A preamplifier circuit, fitted at the base of the antenna, exactly complements the loop characteristics. This combination results in a nominally constant, effective, height over the 2.0 to 32.0 MHz frequency range. The aperiodic loop antenna configuration includes loop/preamplifier elements, in an "end fire" array, with an interconnecting transmission line coupling each element. The element spacing has been carefully chosen to provide optimum directional characteristics for both long and short haul, point-to-point HF communication using the ionosphere. Outputs are available at both ends so the array can look both ways simultaneously, if required, or can be rapidly switched through 180° with a coaxial relay. | |
| Model, Military Nomenclature and NSN Numbers |
Frequency
Range |
Power
Handling Capability |
Antenna
Description |
|
|
||||
|
||||
| 3002-FA | Dual Tower System | The Model T-3002-FA tower system has been specifically designed to provide maximum support for large log periodic antennas. The system includes 2 each 80 foot (24.38 meters), hot-dipped, galvanized steel, knock down towers, the rotator Model R3503 with a DRC control unit, a 100 foot (30.5 meters) rotating mast, a base mounted rotary joint, a 1-5/8" (35 mm) pressurized feed line and all necessary guys and anchors. The rotator and all electrical and electronic components are located at ground level providing easy maintenance access. The heavy duty Model R3503 rotator is supported at the base of the tower with a pivoting yoke system which places the vertical load support at the tower base rather than on the tower itself. | ||
| 3501-GA
|
Rotator | The Model R-3501-GA universal rotator system is designed for medium duty antenna rotation applications where economy, versatility and reliability are emphasized. It will mount on any tower of sufficient face width with the minimum of adaptation required or it may be mounted on the side or on top of towers, poles or other support structures. | ||
| 3502-GA | Rotator | The Model R-3501-GA is a universal, heavy duty rotator system designed to rotate antennas requiring a high starting, breaking, torque, but representing medium vertical loads. It is readily adaptable to any tower of sufficient face width with a minimum of structural adaptation. The main output shaft will concentrically accommodate coaxial transmission lines of up to 1-5/8" (41 mm) in diameter. The system is supplied complete with rotator pedestal, adapter angles, rotator control unit and rotary joint. | ||
| 3503-FA | Rotator | The Model R-3503-FA rotator system is designed for heavy duty applications where medium to high rotating/breaking torques and high vertical loads are imposed. Provided with a 2 point trunnion fixture, this rotator may be easily adapted to most applications. The output shaft is a 12 bold flange mount casting. The rotator drive shaft will concentrically accommodate coaxial transmission lines up to 6-1/8" (15.5 mm) diameter with provisions for rotary joints at the base. These are available as optional accessories. The system is supplied complete with rotator pedestal and azimuth/indicator control unit. | ||
3512 THIS ITEM IS OBSOLETE, BUT WE SUPPORT REPAIRS |
Rotator Control Unit | The Model 3512 (also identified as the DRC-2) rotator control unit is designed to provide both manual and computer remote control for US Antenna Products rotators. In the computer control mode the DRC-2 acts as an interface allowing a computer to control the azimuth of the antenna. It can receive commands from the computer and either of the RS-232 or RS-422 formats. The message between the computer and DRC-2 consists of serial asynchronous data. In the manual control mode the desired azimuth of the antenna is selected by turning the manual control knob; after a 5 second delay, the rotator is activated and the antenna rotates until it reaches the selected azimuth. The antenna's direction is shown on the antenna's direction display. Interconnection between the rotator control unit and the rotator power assembly may be accomplished by using a 2 conductor cable or standard data grade telephone leased lines. The antenna may also be rotated from the tower base using the local controls provided in the rotator power assembly. | ||
3514 |
DIGITAL ROTATOR CONTROLLER | A completely new design of DRC that allows you to control your 3501 or 3503 rotator from anywhere you have an internet connection.The new system incorporates a DC drive motor and ramping feature that reduces wear on the rotator and allows for faster rotation of the antenna.The system is field upgradeable with existing 3501 and 3503 rotators so you are able to update the controls without changing the entire rotator. |
||
| 3715AA | Obstruction lighting kit | The Model 3715AA is an FAA approved obstruction lighting kit of 115 volts. | ||
| 3715AB | Obstruction lighting kit | The Model 3715AB is an FAA approved obstruction lighting kit of 230 volts. | ||
| Model, Military Nomenclature and NSN Numbers |
Frequency
Range |
Power
Handling Capability |
Antenna
Description |
|
|
||||
|
||||
| 4213 AD AS3886/TRC-191 |
30.0 - 88.0 MHz | 100 W CW/200 W PEP | The Model V-4213 is a tactical, transportable VHF manpack, omni directional, vertically polarized discone base station antenna for military broadband VHF communications in the field. This antenna is easily and quickly erected by 2 people in less than 10 minutes with the use of captivated snap-in sockets. It is furnished with a 30 foot (9.14 meters) mast. | |
| 4213
AC
AS-3886/TRC-191
|
30.0 - 88.0 MHz | 100 W CW/200 W PEP | The Model V-4213-AC is the same antenna as the Model V-4213 but is supplied without the mast, guys, anchors and coax. | |
| 5000
AS-3515/GRC 5985-00-121-4334 |
3.0 - 30.0 MHz | 25 kW CW/50 kW PEP | The Model 5000 antenna system consists of one Model LP-1005 antenna array, one Model T-3002 100 foot (30.48 meters) dual tower and rotating mast assembly, and a Model R-3503 rotator. | |
| 5001
|
4.0 - 30.0 MHz | 25 kW CW/50 kW PEP | The Model 5001 antenna system includes one Model LP-1001 antenna array, one Model T-3023 100 foot (30.48 meters) support tower, and a Model R-3502 rotator. | |
| 5002
OE-175-FRC 5985-01-120-2913 |
4.0 - 30.0 MHz | 25 kW CW/50 kW PEP | The Model 5002 antenna system includes one Model LP-1001 antenna array, one Model T-3002 100 foot (30.48 meters) dual tower and rotating mast assembly, and a Model R-3503 rotator. | |
| 5005 | 6.0 - 40.0 MHz | 25 kW CW/50 kW PEP | The Model 5005 antenna system includes the Model LP-1002 antenna array, one Model T-3023 100 foot (30.48 meters) support tower, and a Model R-3502 rotator. | |
| 5006
AS-2178/G 5820-00-145-2962 |
6.0 - 40.0 MHz | 25 kW CW/50 kW PEP | The Model 5006 antenna system consists of the
Model LP-1002 antenna array, one Model T-3002 100 foot (30.48 meters)
dual tower and rotating mast assembly, and a Model R-3503 rotator. |
|
| 600030 | Weatherproof cable | 2 conductor cable. The Model 600030 cable provides connectivity from the DRC-2 panel to the tower control box at the tower base | ||
| 600031 | Weatherproof cable | 12 conductor cable. The Model
600031 cable provides an interface for the DRC controller systems
from the tower control box (at the base of the tower) to the Model
3501 rotator control circuit inputs (at the top of the tower).
|
||
 |
||||
Products and specifications subject to change without notice. |
||||
Home | Antenna Lineup | Products | Contact Us